Index Of The Blog
Those who are looking for a great cooling system should look no further than a wall mounted air conditioner. Unlike the window type which you have to unpack and repack during winter, you can keep this unit hanging on your wall all year long. Its sleek and stylish design means it won’t mess with your room’s interior decor. Click here to know more details about AC Companies Brevard County
By mounting your air-con on the wall, it will also not obstruct your outdoor views, eat up any space, nor impede the flow of traffic. If you are sick and tired of dealing with a cumbersome window air-con unit, now is the time to make the big switch. Here’s how you can DIY (do it yourself) and install a wall mounted cooling system. Click here to visit official site
Pick a Spot on Your Wall
As the name of this air-con says, you have to place this on your wall. Pick a spot by using a stud finder. This will ensure you don’t drill or hammer over necessary electrical wiring or plumbing. It is common for wires and pipes to be hidden inside your wall. Before you make any kind of drilling or hole, you must ascertain that you will not damage anything significant. Select a convenient place that must be near an electrical outlet.
Mark Your Openings for Accuracy
Of course, you want to be accurate because once you drill something, it would damage your wall forever. Take your level tool and draw a line where the topmost edge of your opening will be. After, draw three more additional lines to complete a rectangular shape that’s roughly the size of your unit. Make sure you mark the edges well because you do not want a crooked setup. Mind your line and keep them straight.
Cut Interior and Exterior Dry Wall
You need to utilise a router set to bore about an inch-deep into your drywall, where you’ve placed your markings. Take out a piece of the insulation and save this for later use. If you see any visible wires, you may need to call a certified electrician to move them. After this, work on exterior siding and mark the same rectangle. Use your level to make sure you have the same measurements and position. Drill a hole into this exterior siding. The hole or opening must be big enough to fit your wall mounted air conditioner. If you cannot do the interior work by yourself then hire experts like interior designers in st Louis.
Make a Frame For The Opening
You need to craft a frame that’s made out of 2″ by 4″ wood. This must fit snugly in your new wall opening. This frame is crucial as it will allow you to slip your air-con unit into its proper place. Secure this frame to your wall by using nails and wall studs. Make sure everything is snug because you don’t want anything to fall out.
Put the Air-Con in Place
When everything is done, place the air conditioner into the wall opening. Make sure you screw your cooling system well so that it will always remain in its proper place. You can use the insulation that you saved by packing it into the spaces between your wall and air-con. As the final step, close your opening by adding the drywall.
Note that if you are installing a split-type of air-con, just follow the same steps, but do not deal with the exterior siding. Make sure you mount your split securely on the wall, then you must make a small vent from the interior wall to the exterior wall for the tube that connects the unit to the air compressor, which will stay outside your house.
Final Word
Installing your own cooling system into your wall is not as hard as you think. For best results, watch the many DIY tutorials on the world wide web. If you are feeling unsure, then you can pay a professional. It will not cost too much to have them mount your unit. You will save yourself the time and the hassle, giving you great value for money. Sometimes, it is best to pay for convenience.
