Most of you indulge in cleaning your porous tile floor and grout on a regular basis. Many even resort to repairing a chip in the floor tile if any, but often fail to seal a floor tile. Natural stone tile floor is more porous than a non-natural tile floor. Sealing natural stone is one of the most important steps to ensure that your tile flooring, or showers look great and last for a long time. Any natural floor tile needs to be periodically sealed and for this you need to know how to seal tile in the right way.
Before we explain how to seal tile, let us understand the nature of a porous tile floor, so that you know why sealing is necessary.
Why do you Need to Seal a Porous Tile Floor?
Sealing is the best way to add sheen and to preserve the beauty of your stone tile. If your porous tile floor is asking for cleaning and maintenance regularly, you will notice that post sealing, your cleaning work gets reduced to half or even negligible in some cases. If you do not seal your porous tile, it may lose its sheen and brilliance in some time.
- As the surface of natural stone tile is permeable, it absorbs water and moisture into its pores. This dampness inside invites mold breeding.
- These stones chip off due to heavy impact.
- Some natural stones also shed dust. The dust shed by some stone tiles like slate result in a dusty and dirty looking flooring. Furthermore, the color of the tile also fades in some time.
- Natural stone used in kitchen countertops is more susceptible to oil leaks and hence develops more intense and deep-rooted stains and grime.
To prevent these occurrences, it is easy to seal natural stone using a good quality tile floor sealer. A good quality or heavy-duty sealer makes the surface waterproof and gets easier to clean.
Your surface should always have the appearance of drops of water as if its beaded. Re-sealing your tile is required only if you find water getting absorbed into the surface. If the seal has worn off, you can find out by observing how water stands on the surface. If there are water droplets in a beaded form, sealant is still there, if water does not form beads, then the sealant has worn off.
How to Seal your Natural Stone?
Once you have determined if the porous tile floor needs to be sealed, you need to buy a good quality tile grout sealer to give you best results. Celine from pFOkUS is a tile enhancer and a sealer that imparts a glossy shine to the tile.
Celine is a clear topical solvent-based epoxy grout sealer that creates a hydrophobic surface while penetrating deep into the tile and grout. Celine also gives a very sleek and natural appearance unlike other low quality sealers which are very bulky. Celine makes the surface waterproof and also prevents dust, grime and stains from sticking to the surface.
Here is How you can Seal your Natural Stone with Celine:
- After you have thoroughly cleaned the surface using tile floor cleaner, you need to wipe it with a soft rag. You have to make sure that the surface looks dry and there is no wetness.
- Now apply Celine in an even looking layer on the surface. An applicator can help to spread the sealant evenly. You will see a semi-glossy finish after the first coat.
- Let Celine dry for 48 hours before you set out to apply the next coat.
- Do a small water test in a side area to check whether the sealant has dried or not.. You will notice that the water will remain like droplets on the surface unlike before application of this natural stone sealer – Celine, when the water used to get absorbed quickly.
- After 48 hours, you need to apply the second coat. Apply it patiently for 1-5 hours and you will see a very high gloss sheen of the stone.
So do not delay the process of sealing your porous tile floor. Follow the instructions above, buy Celine form pFOkUS and preserve the beauty of your flooring forever.
