6 Easy DIY Motorcycle Maintenance Tips - Writers Evoke
Automobile

6 Easy DIY Motorcycle Maintenance Tips

Motorcycle Maintenance Tips

Motorcycle Maintenance Tips

Sydney is unquestionably among the world’s most beautiful cities. The state capital of New South Wales boasts of having Bondi and Manly, stunning golden beaches that attract people from the world. It is also home to the Sydney Opera house, a 20th-century architectural masterpiece. Whether you are into modern wonders or expansive coastlines, Sydney has something for you.

A perfect way to enjoy the city’s sight is on the back of the best Triumph motorcycles Sydney has to offer. It is a beautiful piece of machinery, a seamless match to the lovely place—Sydney. If you own a motorcycle in the city, here are a few tips to ensure it is in perfect running condition and always ready for an adventure.

1. Change the oil regularly.

You should replace the oil every 5,000 to 10,000 km of mileage, depending on the type of oil you use and the motorcycle engine. The weather also has some effect on the frequency, with warmer climates shortening the cycles a bit. Another way to know how often you should do an oil change is by checking the manual.

Before you change the oil, it would be better if you ride your motorcycle for five minutes. This will warm up the engine and make the oil in it less viscous and easier to drain. After warming it up, turn off the engine, remove the drain plug, and let the old oil flow into a drip pan. Once the oil is drained, replace the filter, install the drain plug, put in the proper amount of fresh oil, and put back the oil cap.

Also Read  How to Maintain the Brake Lever of a Dirt Bike?

2. Clean your engine’s air filter.

Triumph motorcycles in Sydney run best if the air filter in the engine is kept clean. The easiest way to clean a filter is with compressed air. If your engine’s air filter is hard to access or if it is visibly worn out, replace it with a new one. This prevents your engine from working harder than it has to.

3. Test your brakes.

Make a habit of checking your brakes before you go out for a ride. Make sure that the thickness of the brake pads and the level of your brake fluid are fine. Replace the pads before the metals beneath them start to show.

4. Maintain recommended tyre pressure and proper tread.

Same with the brakes, check your tyres regularly before you get on your motorcycle. Maintaining good tyre pressure is important for easier handling on the road, avoiding disastrous blowouts, and making your tyres last longer.

6. Take good care of the chain.

To keep your Triumph motorcycles in Sydney running smoothly, make sure that the chain is tensioned properly. Excessive tension will damage your wheels and gearbox while too much slack will wear out the chain and the sprocket prematurely. Another tip is to lubricate the chain after riding, while it is still warm, and letting the chain absorb the oil as it cools down.

6. Proper battery charging.

Charge your battery to 100% when not in use using a trickle charger. This will extend the useful life of your battery and save you money from frequent replacement.

Also Read  Does the Transport Sector Play a Big Part in the Air Pollution Problem?

Know your motorcycle more intimately and keep in good running condition with these simple tips so you can enjoy Sydney’s open roads longer in comfort and safety.

Show More

Alison Lurie

Alison Lurie is a copywriter and content strategist. She helps businesses stop playing around with content marketing and start seeing the tangible ROI. She loves writing as much as she loves the cake.

Related Articles

Leave a Reply

Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker